AirNav Systems Forum
AirNav RadarBox and RadarBox24.com => AirNav RadarBox and RadarBox24.com Discussion => Topic started by: tarbat on August 24, 2009, 07:54:37 AM
-
ANRB stops responding and crashes as soon as I try to connect TWO programs to port 7879.
Scenario 1:
Run ANRB - ok
Run Planeplotter - ok
Run MilModeSLogger - ANRB crashes
Scenario 2:
Run ANRB - ok
Run MilModeSLogger - ok
Run Planeplotter - ANRB crashes
Running Planeplotter on port 30003 and MilModeSLogger on port 7879, and ANRB does NOT crash.
I've reverted to v3.01 until this can be fixed.
-
Same Problem with me
Will NOT run 2 programmes in 7879 or 30003
ie
Jstars and Winsend
Back to 3.01
-
Can't even run one program (JSTARS) with RB V3.02 accessing port 30003 I'm afraid.
Either RB freezes, or it shuts down after I click 'connect' on the JSTARS interface.
I've tried this with and without Network traffic selected and it is the same.
-
Hi
I have got the same problem as Allocator - After clicking `connect` on the JSTARS interface RB crashes - after shutting JSTARS, RB comes back on its own.
Andy
-
Same effect using Windows Hyperterminal connecting to port 30003 too - except I don't get RB coming back - it just disappears as it did with JSTARS.
I'll try again with Hyperterminal and port 7879.
-
OK, Hyperterminal works fine with port 7879 (single connection) and the data is delayed 5 minutes.
Disconnected port 7879 and connected port 30003 and RB shuts down immediately.
-
Fixed in the latest version of 3.02beta.
-
Seems OK in latest beta can run Jstars and Winsend
JC