AirNav Systems Forum

AirNav RadarBox and RadarBox24.com => AirNav RadarBox and RadarBox24.com Discussion => Topic started by: Glimmstengel on June 27, 2019, 11:19:33 AM

Title: Hardware connects and disconnects
Post by: Glimmstengel on June 27, 2019, 11:19:33 AM

I have the USB cable in the USB Port of my PC and the latest driver packages installed.
The Energy options of Windows 10 (USB Energy stop deactivated)
On my old PC it works fine with the same configurations.
I use 6.02.003 and the AIRNAV Radarbox.

The problem is now that the Harware Connected/Not Connected sign is only a short time green than red eventually after a few minutes back green. I tried this on all USB Ports of the PC. Any ideas????

Title: Re: Hardware connects and disconnects
Post by: Runway 31 on June 27, 2019, 07:00:21 PM

Have you tried changing the USB cable

Alan

Title: Re: Hardware connects and disconnects
Post by: Aerotower on July 01, 2019, 10:26:45 PM

One time i have the same issue with one USB extended cable, maybe it's better to change the cable.

Title: Re: Hardware connects and disconnects
Post by: Glimmstengel on August 17, 2019, 04:52:47 PM

I tried it with several USB cables. Always the same. No succes....

Title: Re: Hardware connects and disconnects
Post by: Runway 31 on August 17, 2019, 08:53:00 PM

What receiver are you using

Alan

Title: Re: Hardware connects and disconnects
Post by: Glimmstengel on August 18, 2019, 01:41:24 PM

Dont know exactly what you mean, but I use AirNav Radarbox (the black box)

Title: Re: Hardware connects and disconnects
Post by: Runway 31 on August 18, 2019, 07:46:35 PM

I presume that you are using these drivers http://www.airnavsystems.com/Download/ANRB/Drivers/ANRB-Drivers-20161222.zip

Under Control Panel/Power Options/Power Sttings/ Advaned Settings/Sleep and USB settings is there any setting needing adjusted.

Does it matter whether it is on battery or mains power?

Alan