Airnav. Screen still freezes after sorting MyFlights by Altitude. Please confirm that this was supposed to be rectified.
J.
So, let's chalk this one up to something odd for now. And indeed it was. I've seen two ATPs this evening that show a position which is either 12, 24 or 36 degrees North and is always 0 degrees East. Looks like something wrong in the avionics on board, or a faulty setup.
Airnav. Screen still freezes after sorting MyFlights by Altitude. Please confirm that this was supposed to be rectified.Well it is still happening here. It is something to do with the screen saver. Once that is activayed the screen freezes and MyFlights list is added to but not emptied. I know the solution is to turn off the screen saver but to me that is not the real solution but cosmetic.
J.
Could it be mistaking one DF frame format for another? I seem to remember you saying that there is some ambiguity with certain frames if you don't know what the interrogator sent to the aircraft.
A quick look in my log shows the following aircraft with "suspicious" lat/longs:
400FEB G-BUUR ATP British AerospaceAtp Atlantic Airlines
4008F3 G-BUUP ATP British AerospaceAtp Atlantic Airlines
Strange that it's always ATPs. Would that suggest a problem with the airframe rather than the software, but I wonder why the SBS-1 doesn't show these anomolies. Dave, any idea?
A quick look in my log shows the following aircraft with "suspicious" lat/longs:
400FEB G-BUUR ATP British AerospaceAtp Atlantic Airlines
4008F3 G-BUUP ATP British AerospaceAtp Atlantic Airlines
Strange that it's always ATPs. Would that suggest a problem with the airframe rather than the software, but I wonder why the SBS-1 doesn't show these anomolies. Dave, any idea?
Well, looking at the Mode S spec, I suspect that somewhere in the encoding/decoding process a 112-bit DF20 (altitude) or DF21 (squawk) interrogation response is being interpreted by RB as a DF17 (extended squitter).
Don't ask me why or how.
It is now going to be left running to see if the problem with 3.07 returns, i.e. complete loss of connection after around 90 minutes.
I have just upgraded to 3.08. I subscribe to real time network data but I have had a message appear telling me I subscribe to 5 minute delayed data!
In fact I am getting no network data at all- is there a problem with the network at the moment?
Thanks,
Dave
Fenris/DaveReid: we have developed several routines to make sure that all the old SBS-1 users that daily upgrade to RadarBox can continue to use their favotite addon application with RadarBox.
Can you confirm that RadarBox 3.08 is 100% compatible with all SBS-1 addons / 30003 Port?
Fenris/DaveReid: we have developed several routines to make sure that all the old SBS-1 users that daily upgrade to RadarBox can continue to use their favotite addon application with RadarBox.
Can you confirm that RadarBox 3.08 is 100% compatible with all SBS-1 addons / 30003 Port?
I'm afraid it will be a week or so before I get a chance to play with 3.08 as I'm up to my ears in database enhancements (having said that, the end product will potentially be of benefit to all RB users, once the beta phase is over).
Sorry !
Very strange answer considering you have asked so many times for this feature on this forum. Fortunately you have the time to write about other "problems".
Just Installed 3.08 on my machine.
So far now problems,i removed AVG virus checker and installed Avast virus checker.
Running 3.06 with no problems. Tried to upload 3.08 from your link at the beginning of this thread. Unable to >>>> anrb(1).exe unable to locatete Component rb.dll was not found <<<<<< is this because I have disabled drivers to run ARNB on Vista!!???
V3.06 to V3.08: you can do the upgrade by replacing the exe only.
since i installed 3.08 on my Vista Laptop, i get an error message from Windows on shutdown, something like ( i get the message in Dutch, but i'll try to translate it as close as possible for me ) :
ANRB.exe does not function/works anymore
you can search on-line for a solution to this problem
and then 2 options
----> online search for a solution
----> close the program
never had this problem before, and i only have it with Vista ; on my XP dektop all goes like it should
now, as i shut down ANRB, i know it is not working anymore ..... but why does Windows all the sudden keeps me reminding of that ???
Tramline,
This is a beta version not a full version so we are looking for people with some technical knowledge to help us find issues. If you are not a techincal user it may be best to wait untill the full version is released.
When we release beta sometimes with full installs lots of people download who don't actually understand the term "Beta" and over load support.
A Beta version is also not fully supported as well, its main taks are to indentify issues and confirm functions are working as it should.
darkskies74,
Our server is still suffering from yesterday so any features such as photo look ups, routes which use the server could be up and down today.
We apologise for issues caused.
I simply renamed the old anrb.exe to anrb.exe.old and then saved the new anrb.exe in the RB directory.
When I ran it, I got the Windows warning that it couldn't find a signature for the new .exe file, unticked the always ask box and ran the new version. It just worked at that point.
I believe you copied it to the wrong folder. Pls contact our support for a detailed explanation/help.
since i installed 3.08 on my Vista Laptop, i get an error message from Windows on shutdown, something like ( i get the message in Dutch, but i'll try to translate it as close as possible for me ) :
ANRB.exe does not function/works anymore
you can search on-line for a solution to this problem
and then 2 options
----> online search for a solution
----> close the program
never had this problem before, and i only have it with Vista ; on my XP dektop all goes like it should
now, as i shut down ANRB, i know it is not working anymore ..... but why does Windows all the sudden keeps me reminding of that ???
Hi there,
If you close down using the File/Exit message it should not happen. On my Vista set up I get that message only wqhen I close using the Red X at top right hand of screen.
Regards Mike
Hi can I download V3.08 on top of V2.0 and if so, how on earth do I find the folder to rename it, sorry to sound so vague, I am currently running Windows Vista.
Thanks. When I open the link i get a part download and then I get the following message
anrb.exe-Unable To Locate Component
X This application has failed to start because rb.dll was not found.
Re-installing the application may fix this problem.
Then
anrb.exe has stopped working.
Good night, JetBlue (U.S.) and Frontier (U.S.) do not possess a normal callsign, ie, they are only numbers.
It was not possible to do something so that these companies have their logos?
Thanks. When I open the link i get a part download and then I get the following messageSame result both when I run it or save it, should I download V3.07 first, then put V3.08 over that.
anrb.exe-Unable To Locate Component
X This application has failed to start because rb.dll was not found.
Re-installing the application may fix this problem.
Then
anrb.exe has stopped working.
Pffff, why Microsoft could'nd let things as they are, with XP; as far as i know, and that is from DOS 3.11, the best and stable Windows version ever.
Hi Brian, even MS recognise the fact that Vista ain't so hot! Hopefully, all may change with Win 7 (trouble is, if it's perfect from a user's point of view, no-one would want to upgrade to Win 8 - or Win 7.08 even ?)
Running 3.06 with no problems. Tried to upload 3.08 from your link at the beginning of this thread. Unable to >>>> anrb(1).exe unable to locatete Component rb.dll was not found <<<<<< is this because I have disabled drivers to run ARNB on Vista!!???
Give me the simple life.
Well great day Got the 3.08 working on my own...just dropped it in the 3.06 folder. Phew. Also no more F8 Thanks AirNav ;-)
Neil
V3.08 hung
PC had been running for approx 24hrs with v3.08. This evening had found the program had hung. The machine had been untouched for most of the day so its not a case of me changing any ordering in the myflights table.
Graham
I ,too, cannot manage to install 3.08 beta due to the dreaded 'rb.dll not found' message. Having read replies from various others with the same problem, I have decided to stick with the 3.07 version particularly as AN have said that a full download version of 3.08 which is hopefully going to be bug free (and it looks promising that it will be) will be issued within the next couple of weeks.
Yes one more thing I found - several false flight ID messages noticed on all Adria Airways CRJs flights - now flight ID are sometimes changed up to 10 times in a minute and none is right,also the same thing with Italian air force Falcons 900EXs.In previous version I used there was no flight IDs for Adria Airways CRJs planes....
V3.08 hung
PC had been running for approx 24hrs with v3.08. This evening had found the program had hung. The machine had been untouched for most of the day so its not a case of me changing any ordering in the myflights table.
Graham
I ,too, cannot manage to install 3.08 beta due to the dreaded 'rb.dll not found' message. Having read replies from various others with the same problem, I have decided to stick with the 3.07 version particularly as AN have said that a full download version of 3.08 which is hopefully going to be bug free (and it looks promising that it will be) will be issued within the next couple of weeks.
This is really really simple - I think :-)
You will get the rb.dll not found if you try to run anrb.exe from a directory where rb.dll is not present - and as the rb.dll file is in the default RB directory, then if you have copied the anrb.exe file to the right place, then you won't get this message.
So, rb.dll missing message = anrb.exe not in the same directory as rb.dll
Weather request working okay here (EGQK). Manuel, what ICAO code are you using, I'll test if it works here okay.
Hi. I'm using ICAO LPFR.
I did switched back to old version of RB till the new one will be a bit better .....
Since we now have a signed driver I decided to upgrade from 3.01 to 3.08. Downloaded the new driver and then downloaded the new 3.08 'exe'. Guess what, I also get the dreaded 'rb.dll not found' message.
Second issue: Is there a way to transfer my Alerts from 2.01 to 3.08?
Hi. I'm using ICAO LPFR.
I'll test when Airnavs METAR server is back up - it appears to be down at the moment.
OK;http://www.airnavsystems.com/cgi-bin/ANLV_SV/Photo/PA474.jpg;;;;;http://www.airliners.net/L/;PA474;OK;http://www.airnavsystems.com/cgi-bin/ANLV_SV/Photo/PA474,2.jpg;;;;;;PA474
OK;http://www.airnavsystems.com/cgi-bin/ANLV_SV/Photo/PA474.jpg; ;Avro 683 Lancaster B1;UK - Air Force;Ruud Brinks;http://www.airliners.net/photo/UK---Air/Avro-683-Lancaster/1524439/L/;PA474;OK;http://www.airnavsystems.com/cgi-bin/ANLV_SV/Photo/PA474,2.jpg; ;Avro 683 Lancaster B1;UK - Air Force;Gordon Jones - Fast Air Photography;http://www.airliners.net/photo/UK---Air/Avro-683-Lancaster/1546103/L;PA474
just started up but my picture is nothing lkie the first picture you get on air radarbox help no corridors or zones and no contours how do i get these
Hi John
Did you not see the replies to the same question on the other Forum?
What other forum is that then?
Hi John
Did you not see the replies to the same question on the other Forum?
What other forum is that then?
Did you not see the replies to the same question on the other Forum?
hi brattersDid you not see the replies to the same question on the other Forum?
I may be a bit obtuse but if a member asks a "technical" question on this forum, it seems to me that any answers may be of interest to some of the rest of us. As such I expect them to appear here. That is after all the general idea of a forum, is it not?
What on earth is the point of saying the answer lies on another (secret) forum and then justifying this utter nonsense as trying to "avoid duplication?" Duplication for whom? Not the guys reading this page, that's for sure.
Wouldn't be someone using one forum to promote another by any chance?
(Thanks tarbat for some clarification)
Wouldn't be someone using one forum to promote another by any chance?
Get the window how you want it to look, and then select Window - Record from menu.
Tramline,
This is a beta version not a full version so we are looking for people with some technical knowledge to help us find issues. If you are not a techincal user it may be best to wait untill the full version is released.
When we release beta sometimes with full installs lots of people download who don't actually understand the term "Beta" and over load support.
A Beta version is also not fully supported as well, its main taks are to indentify issues and confirm functions are working as it should.
Peter, Airnav has a relatively low-res worldwide coastline because of bandwidth. You can download a hi-res European coastline from this website (you have to install a small programme to allow the download) http://www.sbs-resources.com/downloads/index.htmlHi ACW367, many thanks for the excelent tips. It works and my countryborders are correct now.
If you do download the outline, you will need to disable the default states outline on the general signs tab. If you are unsure how to use outlines, refer to http://www.airnavsystems.com/forum/index.php?topic=58.0 or the outlines thread http://www.airnavsystems.com/forum/index.php?topic=717.0
Transfert time between My Flights and Real Network about 4 a 5 minutes.
Hi,
I am always in 3.06, but no way to get the other versions as 3.07 and 3.08.
Where is the correct adress to get them?
Thanks
I think this will have been down to problems with the server. It seems that somehow when it did not receive the correct data from the various databases it uses it then repopulated our navdata.db3 with empty fields.
At least, that is what several reports have said here.
I think this will have been down to problems with the server. It seems that somehow when it did not receive the correct data from the various databases it uses it then repopulated our navdata.db3 with empty fields.
At least, that is what several reports have said here.
Yes, AirNav's recommended fix (apparently it was only certain users who were affected?) was to disable the download of aircraft details/photos.
Probably too late to help now for those who didn't follow that advice ...
Updating the MyLog is nice...but does nothing to help you update the NavData.db3.
You can't have just the registrations without the Mode S code in the DB. You can have Mode S without the registration - as RB detects the Mode S code then adds the registration info either from the database or by autopopulation.
YXUphoto - there does seem to be a bit of a time lag before the manual updates are saved to the DB proper. If you make changes then immediately shut down RB and open it again, RB might not have saved the datails - maybe some sort of cache going on there?
After you have manually added a record using Database Explorer, shut down Database Explorer but leave RB running. Open DB Explorer again and search for your new record by mode s - can you see it?
You are using Database Explorer are you, and not just editing records in MyLog?
Find the Navdata file you copied across and right click on it and check that its not read only. If for some reason when you made a backup copy its become read only that would explain why records are not being saved to it.
A Vista virtual store problem maybe?
Just been making changes to NavData.db3 and the date for this and MyLog is 17 Nov 2009
Yes, you have indeed installed it in the place you should.
No clear idea on why you are suffering this way.
If I think of anything I will comment further. You might look for software that can monitor the files a program has open, the mode they're opened in etc. I could give you a clue....
I'm trying to download the beta, but only comes up with this page:i have ask this to, got no answer, still waiting airnav
The file or page you are looking for might have been removed,
had its name changed, or is temporarily unavailable.
*
Make sure you entered the correct address
*
Open our home page www.airnavsystems.com and try to look for links to the information you want
*
Click the Back button on your browser and try another link
*
If the problem persists please contact us
Can anyone come up with a solution for this ? Has the beta been removed for some reason ?
We are aware of this. We should be releasing a newer version soon so just holding back at the moment with this one.thanks airnav.
Just one thought. How is the partition formatted where the databases are located? If using NTFS in Vista, it could be something to do with Transactional NTFS.
I had a problem back in my SBS1 days, when the log file would appear to never get updated until the program exit, simply because Transactional NTFS was never told to commit the updates. See http://www.kinetic-avionics.co.uk/forums/viewtopic.php?p=42098#42098 and http://groups.yahoo.com/group/planeplotter/message/3016
I run my Radarbox (and Planeplotter, etc.) on a FAT32 formatted partition. Might be worth a try if nobody has any other suggestions.
Sorry, why did you edit the bak file? and do you mean RB was in running in the background while doing it?Edited because there was a flight that did not appear in the report for having an incorrect date.
Interesting idea about the NTFS. Somehow I think it isn't the problem here, if it was, the problem would be more wide spread. I'm starting to think that the problem is with the number of entries I have added or modified manually.