AirNav Systems Forum

AirNav RadarBox and RadarBox24.com => AirNav RadarBox and RadarBox24.com Discussion => Topic started by: lenow on December 20, 2014, 11:18:38 AM

Title: Upgrade to 5.00.072 Problem
Post by: lenow on December 20, 2014, 11:18:38 AM

After upgrading radarbox 2009 to version 5.00.072 Radarbox No longer functions.
No aircraft being received and Hardware at bottom left of screen shows a yellow box and message "Hardware checking" Network also shows a yellow box.
What went wrong?
Driver is installed.

Title: Re: Upgrade to 5.00.072 Problem
Post by: Runway 31 on December 20, 2014, 11:20:33 AM

What windows version are you using

Alan

Title: Re: Upgrade to 5.00.072 Problem
Post by: lenow on December 20, 2014, 11:53:43 AM

Windows 7 on an Acer Aspire 8930.

Title: Re: Upgrade to 5.00.072 Problem
Post by: Runway 31 on December 20, 2014, 12:37:02 PM

32bit or 64 bit windows 7.  If it is 64bit have you downloaded and installed the 64 bit drivers
http://www.airnavsystems.com/download/ANRB/drivers/ANRB64bitDrivers.zip

If you go to Start/Devices and Printers you will find your Radarbox under unspecified

Alan

Title: Re: Upgrade to 5.00.072 Problem
Post by: lenow on December 20, 2014, 01:00:43 PM

Thanks Alan, problem sorted! Unplugged rxer waited 60seconds plugged in again, now up and running! Thanks for the replies.
Rgds.
L.

Title: Re: Upgrade to 5.00.072 Problem
Post by: Runway 31 on December 20, 2014, 01:07:14 PM

Glad its now going

Alan