AirNav Systems Forum
AirNav RadarBox and RadarBox24.com => AirNav RadarBox and RadarBox24.com Discussion => Topic started by: Chris11 on August 12, 2018, 03:17:33 PM
-
No map will display. The map name appears on the top left (?????.ml4) but the screen is blank. Is there anything I can try before a reinstall?
We have had a few power failures recently with the computer going off which could have caused a corruption.
-
Try changing to another map
Alan
-
Done that with a couple of the standard maps with the same result
-
Try the World one other than that I would re-install. looks like something may have got corrupted
Alan
-
Oh no - reinstall has created an error. As soon as I load ANRB I now get a Error message List index out of bounds. If I click OK the error just reappears. I will email support
-
Never seen that before Chris
Delete the previous installations including manually deleting any orphan files left behind then reinstall and ensure you don't install to program files.
Alan
-
Thanks Alan - I am in email contact with support. Looks like a new install as Administrator has solved th 359 issue but now I have blank maps.
I will let you know how it goes.
-
OK - sorted at last. Complete new install. By copying files from my backup I found that the data file was the one that was causing the problem. Pity - there were lots of manual additions.
My setup has been lost - onething I cannot find out how to do is get rid of the block with the aircraft altitudes below the map. How is that done?
-
Function key F8
-
Good to know you are back up and running. I presume it is the vertical tracking view you are trying to get rid of, if so use Map/Vertical/Tracking View
Alan
-
Thanks Alan - don't know how I missed that option.
-
Interesting have the same map problem with my software not showing the map. Had an old instance that is working and got up and running by renaming directories and copy over mydata.db3. I don't do manual updates but rely on the stirling work of the updaters. What was the file name that was corrupted on your system. Will try and replace this and see what if that fixes my corrupted version.
Graham
-
Try running program as administrator worked for me
-
I would suggest that the mydata.db3 or the Navdata.bd3 could be the culprit Graham
Alan
-
copied mydata across to the working instance so that seems to rules that one out. Will copy across the working navdata and see what happens.
Ta
Graham
-
I would suggest that you do it the other way Graham copy across the working files to the non working
Alan
-
yes did with the navdata but no change. The map is displayed minimised and the system goes into the hour glass when I try and maximise the map.
As both copies have bugs albeit different ones will attempt to install a new fresh copy.
Can anyone advise correct procedure for installing the ve 6 SW with the win10 64bit drivers and the Airnav Micro Radarbox driver
ta
-
If you have a previous copy uninstall then do a manual uninstall for any orphan files left behind
Nothing special for installation Graham, just install V6 to c:\Airnav then install the drivers. http://www.airnavsystems.com/download/ANRB/ANRB60002Setup.exe
http://www.airnavsystems.com/Download/ANRB/Drivers/microRadarbox-Drivers-20150411.exe and it should then start up as before
Alan
-
installed and working better this time. Thanks